#radxa

Radxa AICore DX-M1M Brings 25 TOPS of AI Power to Raspberry Pi and Edge Devices This M.2 module packs 25 TOPS of AI acceleration into a 3W power budget, working with Raspberry Pi 5 and other Arm or x86 systems via standard PCIe interfaces.

2 weeks ago

They SHRUNK The Raspberry Pi 5 | Radxa Cubie A7Z Deep Dive — Cooling, NVMe, USB Speed & More YouTube video by Smart Home Circle

This Tiny Board Can Replace Your #Raspberry PI 5

#Radxa Cubie A7Z is all looked at in detail.

👉Watch the full video : youtu.be/1nyaeCO8pH0

0 0 0 0

Lunar Computer

@lunar.computer

2 weeks ago

Radxa AICore DX-M1M Brings 25 TOPS of AI Power to Raspberry Pi and Edge Devices

#Radxa #AiAcceleration #M.2Modules #RaspberryPi #EdgeComputing

0 0 0 0

1 month ago

Zelená Radxa Rock5B s fialovou rozšiřující deskou v 3D tištěné bedně

Bedna s SBC ležící na boku. Jeden 7seg displej je zasazený ve svém chlívku, druhý visí z bedny. Oba displeje shodně ukazují číslo 5

Zapojeno. A po odpoledni stráveném ve Vimu i funguje 🥵
Aktuálně se spíná ventilátor v bedně při 60°C na plno, zatím žádné pwm 😕 To je problém pro mě v budoucnu 😄

Kód i HW jsem snad dal na jednu hromadu sem:
https://codeberg.org/janez/rock5b_gpio

#Radxa #Rock5B #Tinkering

0 2 2 0

1 month ago

Fialová deska tištěného spoje osazená všemi komponenty: modrý DC/DC step-up modul, 2x 74HC595, NPN tranzistor BC547, 18x 220R rezistor a headery pro 7seg displeje a ventilátor

Konečně 🥳
Tenhle Frankenstein je podružná deska k #Radxa #Rock5B, která by s pomocí trochy Rustu měla obsloužit 2x7seg displej a ventilátor pro můj mini desktop.
2x8bit posuvný registr by se měl starat o ukládání hodnoty a tranzistor BC547 o PWM ventilátoru.
Snad to nevybouchne 😄

0 0 1 0

1 month ago

They SHRUNK The Raspberry Pi 5 | Radxa Cubie A7Z #sbc #iot #linux #server #project YouTube video by Smart Home Circle

They SHRUNK the #RaspberryPi 5

#Radxa Cubie A7Z

youtube.com/shorts/mbcR-...

#sbc #linux #computer

0 0 0 0

1 month ago

Pracovní stůl s monitorem (5:4) s otevřeným FreeCADem. Vlevo vypnutý monitor na výšku. Vpravo od monitoru svítí ve tmě 2x7seg displej na minibedně pro SBC, v pozadí za monitory jsou RGB světla podsvěcující levou část setupu tyrkysově, pravou oranžovo-žlutě

Naše setupy pro #DIY projekty nejsou stejný 😅

#FreeCAD, kde doháním prototypování a parametrizaci modelu na 5:4 monitoru, který pohání #Radxa #Rock5B SBC.

1 0 0 0

Radxa Cubie A7S is a tiny, versatile single-board computer for $25 and up The Radxa Cubie A7S is a single board computer with an Allwinner A733 processor, LPDDR5 memory, and a versatile set of ports and connectors that includes USB Type-C and Type-A, Gigabit Ethernet, and even a PCIe 3.0 interface. And all of that fits on a board that measures just 51 x 51mm (about 2" x 2"). Radxa plans to offer the Cubie A7S with up to 16GB of onboard memory and up 256GB of eMMC storage.

1 month ago

Radxa Orion O6N: Beast In A Small Form Factor | Benchmarks, Performance, OS, UEFI, GPU Walkthrough YouTube video by Smart Home Circle

NEW Video 👇👇👇

Beast In A Small Form Factor — Radxa Orion O6N

👉Full Performance & Usage Review : youtu.be/JzfFAwOaWFI

#sbc #radxa #arm #ai #future

0 0 0 0

Keldrim

@keldrim.bsky.social

1 month ago

Naked Radxa Q6A, no case just on some brass stands, passive copper cooler keeping the SoC, a Qualcomm QSC6490 from throttling.

Terminal with a neofetch output showing a mildy custom ubuntu 24.04.3 running the Radxa single board computer, SoC is a Qualcomm QSC6490 with 8 GB RAM LPDDR5 @ 5500MT/s and GPU is a Adreno 643.

Finally got my copper cooler delivered so I can test my #Radxa Dragon Q6A #SBC and man this thing is insane, if my use of a microSD would not hold it back, then you could fool someone to think its a regular PC, also first SBC to play #OpenArena flawless that old game beats those normally.

0 0 1 0

Pierre Lecourt

@minimachines.net

1 month ago

Radxa Cubie A7S : un ordinateur dans le creux de votre main
La carte de développement Radxa Cubie A7S embarque presque tout ce qu'il faut pour devenir un PC comme un autre..
buff.ly/D8YIApr #radxa

2 1 1 0

Liliputing

@liliputing.bsky.social

2 months ago

Radxa Cubie A7S is a tiny, versatile single-board computer for $25 and up #AllwinnerA733, #CubieA7s, #Radxa, #RadxaCubieA7s, #Sbc

3 0 0 0

Keldrim

@keldrim.bsky.social

2 months ago

Picture of an single board computer made be Radxa, fresh after unpacking next to its package.

New #ARM #SBC from #Radxa the Dragon Q6A to feed my little addiction and something I grabbed before RAM prices even wreck that hobby.

Should be interesting being the first SBC with an Qualcomm SoC. Will be a lot fun thing with #Batocera and should be way faster then the PI4 I use for that.

0 0 0 0

XLibre

@xlibredev.bsky.social

2 months ago

OpenMandrivaOrg booth H4 at FOSDEM. They said, "OpenMandriva is pleased to announce the launch of the most expensive marketing program in history at FOSDEM."

The @openmandriva.org.web.brid.gy devs are demoing their distribution with #XLibre at #FOSDEM in Brussels. They brought an #AMD BC250, a #GPD MicroPC 2 UMPC, a #Radxa Orion O6 #ARMv9 SBC, and a #Steam Deck, all running XLibre on #OpenMandriva Cooker. Meet them at booth H4.

x.com/berolinux/st...

5 1 0 0

2 months ago

Radxa Dragon Q6A — The Fastest Pi 5 Alternative?? Benchmarks, Thermal, NVMe, Linux, Windows 11 ARM 🚀 YouTube video by Smart Home Circle

✨I love the #Radxa Dragon Q6A.

Its a perfect replacement for the #Raspberry PI 5

👉Check this full video : youtu.be/oiIn1y9-Dxk

0 1 0 0

Radxa Cubie A7A/A7Z - Allwinner a733 For those with a Radxa Cubie A7A/A7Z, I made a custom Armbian Build using the BSP kernel. https://github.com/NickAlilovic/build/tree/Radxa-A7A https://github.com/NickAlilovic/build/releases/tag/Radxa-...

2 months ago

There is an unofficial @armbian.bsky.social build available for #radxa Cubie A7A

forum.armbian.com/topic/56130-...

0 0 0 0

2 months ago

Dvě krabičky - ve spodu bílo zelená krabička Radxa Power DC12 60W, na vrchu červená krabička s bílými nápisy Radxa Penta SATA HAT

Další dílek skládačky pro upgrade Home Serveru. V podstatě už zbývá "jen" poskládat software stack, otestovat a vymyslet, do čeho to všechno dám.

#RaspberryPi #Radxa #selfhosting

0 0 2 0

@linuxgizmos.com.web.brid.gy

3 months ago

Radxa Dragon Q6A — The Fastest Pi 5 Alternative?? Benchmarks, Thermal, NVMe, Linux, Windows 11 ARM 🚀 YouTube video by Smart Home Circle

NEW Video👇👇👇

The Dragon Eats Pi for Breakfast 😃

#Radxa Dragon Q6A could be your #Raspberry Pi 5 Replacement

👉Full Video : youtu.be/oiIn1y9-Dxk

#Radxa #sbc

0 0 0 0

LinuxGizmos.com

3 months ago

(Updated) Orange Pi Previews Compact SBC with Eight-Core Allwinner A733 SoC Orange Pi has unveiled the Orange Pi 4 Pro, a compact single-board computer designed for high-performance edge applications. It integrates an octa-core Allwinner A733 processor, a 3 TOPS NPU, and supports up to 16 GB of LPDDR5 memory, combining AI acceleration with a wide range of expansion interfaces. This SBC features the same SoC found […]

0 0 0 0

Radxa Dragon Q6A is an Arm-based single-board PC with Windows and Linux support The Radxa Dragon Q6A is a credit card-sized computer that looks a lot like a Raspberry Pi. But it's an interesting little device for a few reasons. One is that it has an m.2 slot with support for PCIe 3.0 x2 2230 SSDs. And another is that this little computer is powered by a Qualcomm DragonWing QCS6490 processor. Like most single-board Computers (SBC) with Arm-based processors, the Dragon Q6A officially supported several different GNU/Linux distributions when it…

3 months ago

18$ Computer Has All You Need — Radxa Cubie A5E | NVME, Dual Gigabit Port, Wifi 6 | Full Review 🚀 YouTube video by Smart Home Circle

#Radxa A5E packs all you need in this small form factor.

Check out the full video here 👇

youtu.be/Bv6ReLJgSi8

0 0 0 0

Liliputing

@liliputing.bsky.social

3 months ago

Radxa Dragon Q6A is an Arm-based single-board PC with Windows and Linux support #Radxa, #RadxaDragonQ6a, #RqdxaQ6a, #Sbc, #Windows

2 0 1 0

Liliputing

@liliputing.com.web.brid.gy

3 months ago

Radxa Dragon Q6A is an Arm-based single-board PC with Windows and Linux support The Radxa Dragon Q6A is a credit card-sized computer that looks a lot like a Raspberry Pi. But it’s an interesting little device for a few reasons. One is that it has an m.2 slot with support for PCIe 3.0 x2 2230 SSDs. And another is that this little computer is powered by a Qualcomm DragonWing […] The post Radxa Dragon Q6A is an Arm-based single-board PC with Windows and Linux support appeared first on Liliputing.

0 0 0 0

Raspberry-Pi

@raspberry-pi.activitypub.awakari.com.ap.brid.gy

3 months ago

The **Radxa Dragon Q6A** is a credit card-sized computer that looks a lot like a Raspberry Pi. But it’s an interesting little device for a few reasons. One is that it has an m.2 slot with support for PCIe 3.0 x2 2230 SSDs. And another is that this little computer is powered by a Qualcomm DragonWing QCS6490 processor. Like most single-board Computers (SBC) with Arm-based processors, the Dragon Q6A officially supported several different GNU/Linux distributions when it first launched earlier this year. But this month Radxa announced that the board now supports Windows 11 as well. So far the company is only making “an initial release” available, which may have “some bugs of unverified features. It is intended for testing and development purposes.” But download links and installation instructions are available in the Radxa forum. Technically Windows has supported Arm architecture for many years at this point. But so far Microsoft has only _officially_ supported hardware with Qualcomm processors, which is why you don’t see official Windows builds for SBCs from Raspberry Pi or other models that use non-Qualcomm chips. As CNX-Software reminds us, there _are_ some Raspberry Pi-like systems with x86 processors like the Radxa X4, ODROID-H4+ and LattePanda IOTA that have no problem running Windows. But the Radxa Q6A is pretty unusual as an Arm-based SBC with Windows support. The 85 x 56mm (3.3″ x 2.2″) board’s QCS6490 processor is an 8-core CPU with four Cortex-A78 CPU cores and four Cortex-A55 cores, Adreno 643L graphics, and a 12 TOPS NPU. The Radxa Q6A supports up to 16GB of LPDDR5 memory and offers several options for storage, including eMMC or UFS modules, a microSD card reader, and M.2 connector for an NVMe SSD. Other features include an HDMI port, headphone jack, four USB Type-A ports (one USB 3.1 and three USB 2.0), a USB-C port for power, a Gigabit Ethernet port with PoE support, a 40-pin GPIO header, and several MIPI-CSI/DSI connectors. _viaCNX Software_ ## Support Liliputing Liliputing's primary sources of revenue are advertising and affiliate links (if you click the "Shop" button at the top of the page and buy something on Amazon, for example, we'll get a small commission). But there are several ways you can support the site directly even if you're using an ad blocker* and hate online shopping. ### Contribute to our Patreon campaign _or..._ ### Contribute via PayPal * If you _are_ using an ad blocker like uBlock Origin and seeing a pop-up message at the bottom of the screen, we have a guide that may help you disable it. ## Subscribe to Liliputing via Email Enter your email address to subscribe to this blog and receive notifications of new posts by email. Email Address Subscribe Join 9,505 other subscribers

Radxa Dragon Q6A is an Arm-based single-board PC with Windows and Linux support The Radxa Dragon Q6A is a credit card-sized computer that looks a lot like a Raspberry Pi. But it’s an interesting...

#News #radxa #radxa #dragon #q6a #rqdxa #q6a #sbc #windows

Origin | Interest | Match

0 0 0 0

cnx-software.com

@cnx-software.com.web.brid.gy

3 months ago

Radxa Dragon Q6A Arm SBC gets official Windows 11 preview While most people use Linux on Arm SBCs, it’s typically possible to run Windows 11 on Arm boards with UEFI support, but with caveats such as the GPU and VPU not working and other issues. One solution is to avoid the Arm architecture altogether and go with an x86 SBC like the Radxa X4, ODROID-H4+, or LattePanda IOTA, among others. But things may change for the better now that Qualcomm SBCs are becoming a thing, and Radxa has just announced official Windows support for the Radxa Dragon Q6A. Note that it is only a preview image for now. Nevertheless, here’s what is working without installing additional drivers on Windows 11: HDMI output (inherited from UEFI GOP) PCIe – Note: NVMe available; system does not include network card drivers eMMC flash UFS USB 2.0 USB 3.0, but devices must be connected before booting into the system But once you install drivers, [...] The post Radxa Dragon Q6A Arm SBC gets official Windows 11 preview appeared first on CNX Software - Embedded Systems News.

0 0 0 0

linux

@linux.activitypub.awakari.com.ap.brid.gy

3 months ago

Awakari App

Armbian 25.11 Is Out with Support for Radxa ROCK 4D, NanoPi M5, and Debian Forky Discover the latest Armbian 25.11 release, now featuring support for Radxa ROCK 4D. Explore new enhancements and imp...

#Blog #armbian #Armbian #25.11 #Radxa #ROCK #4D

Origin | Interest | Match

0 0 0 0

linux

@linux.activitypub.awakari.com.ap.brid.gy

3 months ago

Awakari App

Armbian 25.11 Is Out with Support for Radxa ROCK 4D, NanoPi M5, and Debian Forky Discover the latest Armbian 25.11 release, now featuring support for Radxa ROCK 4D. Explore new enhancements and imp...

#Blog #armbian #Armbian #25.11 #Radxa #ROCK #4D

Origin | Interest | Match

0 0 0 0

3 months ago

#Radxa is bringing something really nice.
#UEFI #SBC #arm #computer

0 0 0 0